|
|
|
|
|
Auto weight reduction
|
|
Activates the calculation to remove unnecessary material in the plates to reduce the weight of the fixture.
|
|
X plates
|
|
Apply the weight reduction to the support plates in the X direction.
|
|
Y plates
|
|
Apply the weight reduction to the support plates in the Y direction.
|
|
Minimum distance
to XY plate boundaries
|
|
The minimum distance to be kept to the plate boundary, i.e. the minimum width after weight reduction.
|
Value ≥ support plate thickness.
|
Minimum distance
to base plate
|
|
The minimum distance to be kept to the base plate.
|
Value ≥ 1.5 * engraving height.
|
Base plate
|
|
The weight reduction is computed for the base plate.
|
|
Minimum distance
to boundaries
|
|
The minimum distance to be kept to the XY plates.
|
Value ≥ 1.5 * engraving height.
|
Corner radius
|
|
Switch and value to generate a corner radius at all sharp edges of the weight reduction cut out.
|
Value ≥ 0 mm.
|
Minimum area for cutout
|
|
The minimum area of the weight reduction cut out. If this size is not reached, the cutout will not be applied.
|
|
